Chemical Name JC-1
CAS Number 47729-63-5
Irritant to eyes, skin, and respiratory system. Dilute solutions are less irritating.
First Aid Measures
Eye Contact May enter the body thorough inhalation, ingestion, eye, and skin contact. Flush with water for at least 15 minutes.
Skin Contact May enter the body thorough inhalation, ingestion, eye, and skin contact. Wash skin thoroughly with soap and water.
Inhalation May enter the body thorough inhalation, ingestion, eye, and skin contact. Remove to fresh air. If not breathing, administer CPR. If breathing is diffi
Ingestion May enter the body thorough inhalation, ingestion, eye, and skin contact. If conscious, give large amounts of water. Seek medical attention.
Fire Fighting Measures
Special risks JC-1 is not a fire hazard nor an explosion hazard.
Suitable Extinguish Media Use any means suitable for extinguishing surrounding fire. It is not necessary to use any special fi
Accidental Release Measures
For release of large amounts of material, wear safety glasses and rubber gloves. Stop source of leak and isolate spill area. Collect material in an appropriate container and dispose with regular trash. Wash exposed surfaces with acetone or alcohol and rinse with copious amounts of soap and water. Dispose of all waste in accordance with all national, state, and local regulations.
Handling and Storage
Exposure Controls / Personal Protection
Respirator Dust respirator
Ventilation Extraction hood
Gloves Rubber or plastic.
Other Precautions Plastic apron, sleeves, boots - if handling large quantities.
Physical and Chemical Properties
Melting Point No data available
Boiling Temperature No data available
Density No data available
Vapor Pressure No data available
Solubility in Water Very Low
Flash Point No data available
Explosion limits No data available
Ignition Temperature No data available
Stability and Reactivity
JC-1 is stable for 18 months when stored at 2 degrees C - 8 degrees C and protected from light. When reconstituted to 100X, store MitoPT at -20 degrees C for 6 months protected from light. When diluted to 1X, use MitoPT immediately. JC-1 is light sensitive. It will not decompose in a hazardous manner. Hazardous polymerization will not occur.
Avoid prolonged exposure. Remove contaminated clothing and shoes, and wash before reuse.
Dispose of all waste in accordance with all national, state, and local regulations.
The information contained in this material safety datasheet is believed to be accurate but it is the responsibility of the user or supplier to determine the applicability of these data to the formulation of necessary safety precautions.
Novus shall not be held responsible for any damage resulting from the use of the above product or the information contained in this material safety data sheet.
Copyright Novus Biologicals, LLC