MSDS (NBP2-29902)

QuikChIP Kit (ChIP): https://www.novusbio.com/products/quikchip-kit_nbp2-29902
TRITON X-100

Hazard Information
Chemical Name: TRITON X-100
Chemical Formula: (C2-H4-O)nC14-H22-O CAS Number: 9002-93-1
EEC-No: n/a

First Aid Measures
Eye Contact: Can causes eye irritation.
Skin Contact: Causes skin irritation and is toxic if absorbed through skin. Inhalation: May be
harmful if inhaled. Causes respiratory tract irritation. Ingestion: Harmful if swallowed.
Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.
Handling and Storage
Handling: Avoid contact with skin and eyes. Keep container tightly closed and store and handle in a
cool, dry, well-ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle in a well-ventilated area Gloves:
Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield to protect from splash hazard

Physical and Chemical Properties
Form: Liquid
Color: Colorless
Odor: Odorless
Melting Point: 6 degrees C (42.8 degrees F)
Boiling Temperature: 270 degrees C (518 degrees F) Density: No data available
Vapor Pressure: No data available Solubility in Water: Very soluble Flash Point: No data available
Explosion limits: No data available
Ignition Temperature: No data available

Stability and Reactivity
Stable under recommended storage conditions.

Disposal/Spill Considerations
Small Spill: Dilute with water and mop up, or absorb with an inert dry material and place in an
appropriate waste disposal container. Finish cleaning by spreading water on the contaminated
surface and dispose of according to local and regional authority requirements.
Large Spill:Absorb with an inert material and put the spilled material in an appropriate waste
disposal. Finish cleaning by spreading water on the contaminated surface and allow to evacuate
through the sanitary system.

Sodium Dodecyl Sulphate

Hazard Information
Chemical Name: Sodium Dodecyl Sulphate Chemical Formula: NaC12H25O4S
CAS Number: 151-21-3
EEC-No: 205-788-1

First Aid Measures
Eye Contact: Can causes eye irritation.
Skin Contact: Causes skin irritation and is toxic if absorbed through skin. Inhalation: May be
harmful if inhaled. Causes respiratory tract irritation. Ingestion: Harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Handle powder in
a fume hood. Keep container tightly closed in a cool, dry, well-ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle powder in a fume hood Gloves: Handle
with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield

Physical and Chemical Properties
Form: Solid Color: White Odor: Odorless
Melting Point: No data available Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: Very soluble Flash Point: No data available
Explosion limits: No data available
Ignition Temperature: No data available

Stability and Reactivity
Stable under recommended storage conditions.

Disposal Considerations
Contain spill collect with a vacuum cleaner or by wet-brushing and place in a container for
disposal according to local regulations. Keep in suitable, closed containers for disposal.

EDTA

Hazard Information
Chemical Name: Ethylenediaminetetraacetic Acid Tetrasodium Salt, Dihydrate Chemical Formula: C10H12N2Na4O8.2H2O
CAS Number: 10378-23-1

First Aid Measures
Eye Contact: Can cause slight eye irritation. Skin Contact: Can cause slight skin irritation.
Inhalation: Can cause slight respiratory tract irritation.
Ingestion: Harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Keep container tightly closed in a cool, dry, well-
ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle in a well-ventilated area Gloves:
Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield

Physical and Chemical Properties
Form: Solid Color: White
Odor: No data available
Melting Point: No data available Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: soluble
Flash Point: > 93.3 degrees C (200 degrees F) Explosion limits: No data available Ignition Temperature: No data
available

Stability and Reactivity
Stable under recommended storage conditions.
Disposal Considerations
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Glycine (Glycerine)

Hazard Information
Chemical Name: Glycine (Glycerine) Chemical Formula: C2H5NO2
CAS Number: 56-40-6

First Aid Measures
Eye Contact: Can cause slight eye irritation. Skin Contact: Can cause slight skin irritation.
Inhalation: Can cause slight respiratory tract irritation. Ingestion: Harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Keep container tightly closed in a cool, dry, well-
ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle in a well-ventilated area Gloves:
Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield to prevent splash hazard

Physical and Chemical Properties
Form: Liquid Color: Colorless Odor: Odorless
Melting Point: Decomposition temperature: Starts to decompose at 233 degrees C (451.4 degrees F); Completely
sintered at 280 deg. C.
Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: soluble
Flash Point: >176.67 degrees C (350 degrees F)
Explosion limits: No data available Ignition Temperature: No data available

Stability and Reactivity
Stable under recommended storage conditions.
Disposal Considerations
Small Spill: Use appropriate tools to put the spill in a convenient waste disposal container.
Finish cleaning by spreading water on the contaminated surface and dispose of according to local
and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

PMSF

Hazard Information
Chemical Name: Phenylmethylsulfonyl fluoride Chemical Formula: C7H7FO2S
CAS Number: 329-98-6

First Aid Measures
Eye Contact: Can cause slight eye irritation. Skin Contact: Can cause slight skin irritation.
Inhalation: Can cause slight respiratory tract irritation. Ingestion: Harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Keep container tightly closed in a cool, dry, well-
ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle in a well-ventilated area Gloves:
Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield

Physical and Chemical Properties
Form: Solid
Color: No data available Odor: No data available Melting Point: 92 degrees C (197.6 degrees F)
Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: soluble
Flash Point: No data available Explosion limits: No data available Ignition Temperature: No data
available

Stability and Reactivity
Stable under recommended storage conditions.
Disposal Considerations
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal
container.
Large Spill: Corrosive solid. Stop leak if without risk. Do not get water inside container. Do not
touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or
confined areas; dike if needed. Eliminate all ignition sources. Call for assistance on disposal.

Protease Inhibitor Cocktail

Hazard Information
Chemical Name: 4-(2-Aminoethyl) benzenesulfonylfluoride hydrochloride Chemical Formula: C8H10FNO2S
HCl
CAS Number: 30827-99-7

First Aid Measures
Eye Contact: Can cause slight eye irritation. Skin Contact: Can cause slight skin irritation.
Inhalation: Can cause slight respiratory tract irritation. Ingestion: Harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Keep container tightly closed in a cool, dry, well-
ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle in a well-ventilated area Gloves:
Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield

Physical and Chemical Properties
Form: Solid Color: beige
Odor: No data available Melting Point: 183 degrees C (361 degrees F)
Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: soluble
Flash Point: No data available Explosion limits: No data available Ignition Temperature: No data
available

Stability and Reactivity
Stable under recommended storage conditions.
Disposal Considerations
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Corrosive solid. Stop leak if without risk. Do not get water inside container. Do not
touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or
confined areas; dike if needed. Eliminate all ignition sources. Call for assistance on disposal.

Salmon sperm DNA

Hazard Information
Chemical Name: Salmon sperm DNA Chemical Formula: n/a
CAS Number: 100403-24-5
EEC-No: 309-566-6

First Aid Measures
Eye Contact: May cause eye irritation. Skin Contact: May cause skin irritation. Inhalation: May be
harmful if inhaled. Ingestion: May be harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Handle powder in
a well-ventilated area. Keep container tightly closed in a cool, dry, well-ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle powder in a well-ventilated area
Gloves: Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield

Physical and Chemical Properties
Form: Solid Color: White
Odor: No data available
Melting Point: No data available Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: soluble
Flash Point: No data available Explosion limits: No data available Ignition Temperature: No data
available

Stability and Reactivity
Stable under recommended storage conditions.
Disposal Considerations
Absorb on sand or vermiculite and place in closed containers for disposal. Dispose contaminated
material as waste according to all federal, state and local environmental regulations.. Ventilate
area and wash spill site after material clean-up is complete.

Proteinase K

Hazard Information
Chemical Name: Proteinase K, from Tritirachium album CAS Number: 39450-01-6

First Aid Measures
Eye Contact: Can cause slight eye irritation. Skin Contact: Can cause slight skin irritation.
Inhalation: Can cause slight respiratory tract irritation.
Ingestion: Harmful if swallowed.

Accidental Release Measures
If inhaled, move person into fresh air. If not breathing give artificial respiration and consult a
physician.
In case of skin contact, wash off with soap and plenty of water.
In case of eye contact, rinse thoroughly with plenty of water for at least 15 minutes.
If swallowed do NOT induce vomiting. Rinse mouth with water and consult a physician.

Handling and Storage
Handling: Avoid contact with skin and eyes. Keep container tightly closed in a cool, dry, well-ventilated place.

Exposure Controls / Personal Protection Ventilation: Handle in a well-ventilated area Gloves:
Handle with rubber or latex gloves
Eye Protection: Safety glasses, goggles or face shield to prevent splash hazard

Physical and Chemical Properties
Form: Solid
Color: No data available Odor: No data available
Melting Point: No data available Boiling Temperature: No data available Density: No data available
Vapor Pressure: No data available Solubility in Water: soluble
Flash Point: No data available Explosion limits: No data available Ignition Temperature: No data
available

Stability and Reactivity
Stable under recommended storage conditions.

Disposal Considerations
Small Spill: Use appropriate tools to put the spill in a convenient waste disposal container.
Finish cleaning by spreading water on the contaminated surface and dispose of according to local and
regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish
cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary
system.