F. keratolyticus Endo-beta-Galactosidase Protein, CF

Images

 
There are currently no images for Endo-beta-Galactosidase (8620-GH).

Every product we sell is backed by Novus' 100% Guarantee. If you have used this product, please submit your images and reviews to earn reward points.

Product Details

Summary
Reactivity BaSpecies Glossary
Applications Enzyme Activity
Format
Carrier-Free

Order Details

F. keratolyticus Endo-beta-Galactosidase Protein, CF Summary

Details of Functionality
Measured by its ability to cleave keratan sulfate. 50% cleavage of keratan sulfate (0.5 μg) is achieved using <5 ng rF.k. Endo-beta -galactosidase, as measured under the described conditions. 
Source
E. coli-derived f. keratoyticus Endo-beta-Galactosidase protein
msyB
(Thr2-Arg124)
Accession # P25738
GSENLYFQGHMHHHHHH F. keratolyticus Endo-beta -Galactosidase (Asp25-Leu422) Accession # Q9ZG90
N-terminusC-terminus
N-terminal Sequence
Thr2 (msyB)
Protein/Peptide Type
Recombinant Enzymes
Purity
>95%, by SDS-PAGE visualized with Silver Staining and quantitative densitometry by Coomassie® Blue Staining
Endotoxin Note
<1.0 EU per 1 μg of the protein by the LAL method.

Applications/Dilutions

Dilutions
  • Enzyme Activity
Theoretical MW
59 kDa.
Disclaimer note: The observed molecular weight of the protein may vary from the listed predicted molecular weight due to post translational modifications, post translation cleavages, relative charges, and other experimental factors.
SDS-PAGE
66 kDa, reducing conditions
Publications
Read Publications using
8620-GH in the following applications:

Packaging, Storage & Formulations

Storage
Use a manual defrost freezer and avoid repeated freeze-thaw cycles.
  • 6 months from date of receipt, -20 to -70 °C as supplied.
  • 3 months, -20 to -70 °C under sterile conditions after opening.
Buffer
Supplied as a 0.2 μm filtered solution in Tris and NaCl.
Purity
>95%, by SDS-PAGE visualized with Silver Staining and quantitative densitometry by Coomassie® Blue Staining
Assay Procedure
  • Labeling Buffer: 25 mM MES, 0.5% (v/v) Triton® X-100, 2.5 mM MgCl2, 2.5 mM MnCl2, 1.25 mM CaCl2, 0.75 mg/mL BSA, pH 7.0
  • Assay Buffer: 0.1 M MES, pH 6.0
  • Gel Running Buffer: 40 mM Tris, 1 mM EDTA, adjust to pH 8.0 with acetic acid
  • Recombinant F. keratoyticus Endo-beta -Galactosidase (rF.k. Endo-beta -galactosidase) (Catalog # 8620-GH)
  • Goat Keratan Sulfate Proteoglycans (Catalog # 8618-KS)
  • Recombinant Human Carbohydrate Sulfotransferase 1/CHST1 (rhCHST1) (Catalog # 5316-ST)
  • 8% SDS-PAGE (approximately 15 cm x 20 cm, 20 lanes per gel)
  • PAP35S (prepared in-house using the PAPS Synthesis Kit (Catalog # EA005), ~1 μM  = ~2 x 106 cpm/μL)
  • Gel loading buffer: 0.15 M Tris, 20.8 mM SDS, 1.15 M Glycine, 174 µM Bromophenol Blue, 30% Glycerol 
  • Blotting paper (Fisher Scientific, Catalog # 05-714-4)
  • Gel dryer
  • Glogos® II autorad markers (Stratagene, Catalog # 420202) or equivalent
  • Blue sensitive medical X-ray film
  • X-ray film cassette
  • Film developer (Konica SRX-101A Medical Film Processor) or equivalent
  • Liquid scintillation counter (Beckman Coulter, Model # LS5000TD) or equivalent
  • Liquid scintillation fluid (Beckman Coulter, Catalog # 141349) or equivalent
  1. Create Radiolabeled Keratan Sulfate Mixture containing 0.1 mg/mL Keratan Sulfate, 12 μg/mL rhCHST- 1, and 0.025 μM PAP35S in Labeling Buffer.
  2. Incubate Keratan Sulfate Mixture at 37 °C for 1.5 hours.
  3. Dilute incubated Keratan Sulfate Mixture 3 fold in Assay Buffer.
  4. Dilute rF.k. endo-beta -galactosidase to 2.667, 0.667, 0.2667, 0.133, 0.0667, 0.02, 0.00667, and 0.00133 µg/mL in Assay Buffer.
  5. Combine 15 µL of rF.k. endo-beta -galactosidase at each dilution with 15 µL diluted Keratan Sulfate Mixture. Include a control containing 15 µL Assay Buffer and 15 µL Keratan Sulfate Mixture.
  6. Incubate all reactions at 37 °C for 20 minutes.
  7. Add 15 µL gel loading buffer to each reaction. Mix.
  8. Load 30 µL of each reaction per lane on a gel. Leave empty lanes between samples.
  9. Run at 200 V for 30 minutes.
  10. Transfer gel onto blotting paper and dry with gel dryer for 1 hour or until fully dry.
  11. Affix two autorad markers to the blotting paper next to the dried gel.
  12. In a darkroom expose dried gel to X-ray film by enclosing overnight in a cassette. Develop the following day.
  13. Using the dried gel, begin marking regions to be cut out for scintillation counting.
  14. Mark a horizontal line across the top of the entire gel just under the bottom of the wells.
  15. Using the developed film as an overlay, mark a second line just below the lower edge of the labeled Keratan Sulfate for each well.
  16. Draw a third line just below where the labeled product migrated (ignore any free sulfate, appearing equivalent in all lanes, and migrating the furthest). For the control, identify the empty region where the product would appear.
  17. The area between the first two lines is considered to contain the labeled starting material. The area between the second two lines is considered to contain the compact cleavage product resulting from the reaction.
  18. Mark vertical lines distinguishing one lane (reaction condition) from another.
  19. Cut each region (two per lane) and place each into a separate liquid scintillation vial. Add 5 mL liquid scintillation fluid to each vial and count the vials for 35S.
  20. Determine the amount of rF.k. Endo-beta -galactosidase required for 50% cleavage by plotting % cleavage vs. ng of
    rF.k. Endo-beta -galactosidase with 4-PL fitting.

Per Reaction:
  • Keratan Sulfate: 0.5 μg
  • rF.k. Endo-beta -galactosidase: 40, 10, 4, 2, 1, 0.3, 0.1 and 0.02 ng

Notes

This product is produced by and ships from R&D Systems, Inc., a Bio-Techne brand.

Alternate Names for F. keratolyticus Endo-beta-Galactosidase Protein, CF

  • Endo-beta-Galactosidase

Background

F. keratolyticus Endo-beta -Galactosidase hydrolyzes internal beta (1-4) galactose linkages in poly-N-acetyllactosamine [GlcNAc beta (1-3)Gal beta (1-4)] structures as well as sulfated structures such as keratan sulfate (1). It has wider substrate specificity and work more efficiently than its counterparts from E. freundii and B. fragilis (2). The enzyme may be used in fractional protein isolation (3). It may also be used for deglycosylation (4). Branching and/or fucosylation of the substrate may reduce or inhibit cleavage.
  1. Leng, L. et al. (1998) Gene 222:187.
  2. Amano. J. et al. (1991) J. Biol. Chem. 266:11461.
  3. Maria Vistnes et al. (2014) PLoS ONE 9:e89621
  4. Xiaoke Yin et al. (2013) Molecular & Cellular Proteomics 12:956.

Publications for Endo-beta-Galactosidase (8620-GH)(2)

Reviews for Endo-beta-Galactosidase (8620-GH) (0)

There are no reviews for Endo-beta-Galactosidase (8620-GH). By submitting a review you will receive an Amazon e-Gift Card or Novus Product Discount.
  • Review with no image -- $10/€7/£6/$10 CAD/¥70 Yuan/¥1110 Yen
  • Review with an image -- $25/€18/£15/$25 CAD/¥150 Yuan/¥2500 Yen

FAQs for Endo-beta-Galactosidase (8620-GH) (0)

There are no specific FAQs related to this product. Read our general customer & technical service FAQs.

Additional Endo-beta-Galactosidase Products

Blogs on Endo-beta-Galactosidase

There are no specific blogs for Endo-beta-Galactosidase, but you can read our latest blog posts.

Contact Information

Product PDFs

Calculators

Concentration Calculator

The concentration calculator allows you to quickly calculate the volume, mass or concentration of your vial. Simply enter your mass, volume, or concentration values for your reagent and the calculator will determine the rest.

=
÷

Review this Product

Be the first to review our F. keratolyticus Endo-beta-Galactosidase Protein, CF and receive a gift card or discount.